|
Heatrae Sadia Electromax 9kW Electric Combi Boiler Ref: 95022203 |
|
Specification Approvals: BEAB approved. Manufactured in the UK in a BS EN ISO 9001:2000 registered factory. Capacities: Electric boiler: Nominal Capacity -1.3 litres. Cylinder: Nominal Capacity - 180 litres. Controls: Supplied with programmable room thermostat: Three On / three Off periods per day. Weekday and weekend can be programmed separately. Battery operated. Polarity-free connection to boiler. Factory Safety: Primary system expansion vessel (12 litre/3 bar) factory fitted. Potable water expansion vessel (18 litre/3.5 bar) supplied loose. Automatic bypass valve (factory fitted). Pressure Relief valve factory set to 3 bar. Cylinder fitted with Temperature and Pressure Relief valve, factory set to operate at 10 bar/90°C. Outer Casing: White stove-enamelled corrosion-resistant steel. Control Panel fascia: ABS - light grey. Pump: Grundfos UPS15-50 (with integral automatic air vent). Rating: Boiler: 9kW @ 240V (8.3kW @ 230V) Immersion heaters: 2 x 3kW @ 240V (2 x 2.8kW @ 230V) Heating. Safety Features: Boiler: 2 amp fused pump supply, Dual control circuits, Dual switching of the elements, Self check circuitry and fault indication. Re-settable trips. Cylinder: Manually re-settable cut-out on heating element operates at 85°C (feature is an integral part of the thermostat). Thermal Insulation: Boiler: Armaflex closed cell insulation. Dust, fibre and CFC free (ODP Zero). Cylinder: CFC/HCFC Free (ODP zero) expanded polyurethane. the date of purchase. GWP 3.1 (Global Warming Potential). Thermostat Spec: Boiler: Electronic dual control, user adjustable 65°C to 80°C. Cylinder: Element thermostat adjustable from 10°C to 70°C. Water Container: Model Rating Capacity Weight Product code Ordering guide Boiler: Copper. Cylinder: Duplex 2304 (Grade 1.4362 EN 10088) stainless steel with external expansion vessel. expansion vessel (18litre) supplied. * Controllable, efficient wet central heating * Programmable room thermostat to accommodate a wide range of off-peak tariffs * Uses standard radiators and thermostatic radiator valves * Designed for sealed systems * Domestic hot water from unvented direct hot water cylinder * Cylinder manufactured from high grade Duplex stainless steel * No flue and no fuel tanks allow flexible installation location * Silent in operation * Automatic pump exercise feature for periods when boiler is switched off * Front panel indication to show boiler status * Solid state technology for long life * Soft start and zero volt switching to avoid power surges * Min/max control adjusts the water temperature output from the boiler * Minimal service and maintenance costs * No requirement for annual gas safety certificate * On-site parts and labour guarantee * - 10 years on the cylinder * - 2 years on boiler and other controls |
|