Ref:227574 
Part number: FHSCableMat Manufacturer: VarmeMfr Part No.
|
| Varme Floor Heating Standad Cable Mats 150
Varme Floor Heating Standad Cable Mats 150w/m²
Please Note: Suitable for all internal rooms - will give an average of 150 watts per SQM at approx 85% floor coverage.
The cable mat system is similar to the cable kit, using the same 3mm 'twin core' cable with a single cold lead. The only difference being that the cable is already pre-spaced & attached to a self-adhesive mesh. With the heating cable already spaced out & with a self-adhesive coating on the mesh, installation couldn't be simpler!
The mat is simply rolled out, pressed onto a primed floor, then tiled over. The mat is suitable for both timber & concrete sub-floors & is ideal for larger, rooms where it saves time on spacing our loose cables.
Cable mats are available in 150w per sqm for internal rooms & now 200w per sqm for conservatories & areas of high heat loss
Every kit comes complete with:
* Heating cable supplied pre-spaced to a self adhesive mesh.
* Fully programmable thermostat controller with floor probe.
* Floor primer.
* Roller for primer.
* Simple installation instructions
* Freephone technical helpline
* Manufacturers Lifetime warranty
Over 40% Discount Off RRP
For installation instructions please click here.
Please choose from the lists below the model that you would like.Models 150W - 1800W
|
| Models 1950W - 3600W
|
|
|
9am to 5pm Monday to Friday
